If you’re looking to give your truck or car a sleek, lowered appearance, installing lowering blocks is a cost-effective and efficient way to achieve that desired look. Lowering blocks can be easily installed, and in this article, we will provide a step-by-step guide on how to install lowering blocks on your vehicle.
What are Lowering Blocks?
Lowering blocks are small metal or composite blocks that are inserted between the leaf spring and the axle housing of your vehicle. By adding lowering blocks, you can effectively lower the suspension of your vehicle, resulting in a more aggressive stance and improved handling. Lowering blocks are commonly used in trucks and classic cars to achieve that desired lowered look.
Credit: www.youtube.com
Materials Needed:
Before we begin, make sure you have the following materials:
| Lowering Blocks | U-Bolts | Wrench | Jack Stands | Jack |
| Socket Set | Lubricating Oil | Tape Measure | Shop Rag | Safety Glasses |
Step-by-Step Guide:
Follow these steps to successfully install lowering blocks on your vehicle:
- Start by parking your vehicle on a flat and level surface. Engage the parking brake for safety.
- Using a jack, raise the rear end of your vehicle until the tires are off the ground. Place jack stands under the vehicle to ensure stability.
- Locate the leaf spring and the axle housing. Use a wrench to loosen and remove the U-bolts that are securing the leaf spring to the axle housing.
- Gently lower the axle housing and position the lowering blocks between the leaf spring and the axle housing. Make sure the blocks are centered and aligned.
- Apply lubricating oil to the U-bolts to ease installation. Insert the U-bolts back into place and tighten them using a wrench.
- Double-check the tightness of the U-bolts to ensure a secure fit. It is essential to tighten them properly to prevent any potential issues.
- Repeat the above steps for the other side of your vehicle.
- Once the lowering blocks are securely installed on both sides, carefully lower your vehicle back onto the ground using the jack.
- Take your vehicle for a test drive to gauge the difference in handling and appearance. Enjoy the enhanced look and improved performance of your lowered vehicle!
Installing lowering blocks on your vehicle is a straightforward process, but it is essential to follow these steps carefully to ensure a proper installation. If you’re unsure about any step, it’s always a good idea to consult a professional mechanic.
Credit: www.classiccarrestorationclub.com
Frequently Asked Questions On How To Install Lowering Blocks
How Much Does It Cost To Install Lowering Blocks?
The cost of installing lowering blocks varies depending on factors such as the vehicle model, location, and labor fees. It is recommended to contact a professional mechanic or local auto shop for accurate cost estimates. Lowering blocks, when installed correctly, can provide a sleek and lowered appearance to your vehicle.
Are Lowering Blocks Safe?
Lowering blocks can be safe when used correctly. However, it’s important to note that if you lower your car more than a couple of inches using lowering blocks, you may run into problems. For instance, if you still have the stock leaf springs, your car may bottom out on the bumpstops or the frame if the axle housing is raised too much.
It’s crucial to ensure that the installation is done properly and take into consideration the limitations of your car’s suspension system.
Can I Install Lowering Springs Myself?
Yes, you can install lowering springs yourself. It is a relatively easy process that can be done with basic garage tools and some knowledge. Lowering springs are designed to replace your factory coil springs and work with your existing suspension.
With access to a garage and a little know-how, anyone can successfully complete this modification. Follow step-by-step instructions and refer to helpful videos and tutorials for guidance.
How Much Does It Cost To Put Lowering Springs On A Car?
The cost of installing lowering springs on a car can vary depending on several factors such as the make and model of the car, the brand of the lowering springs, and the labor charges of the mechanic. On average, you can expect to spend around $300 to $500 for parts and labor.
However, it is recommended to consult with a professional mechanic or car customization shop for an accurate cost estimate tailored to your specific vehicle.
How Much Does It Cost To Install Lowering Blocks?
Lowering blocks can cost anywhere from $50 to $150, depending on the brand and quality. Additionally, you may need to factor in the cost of professional installation if you don’t have the necessary tools and experience to do it yourself.
Conclusion
In conclusion, installing lowering blocks is an effective way to achieve that desired lowered look for your vehicle. Follow the step-by-step guide outlined above, and you’ll have a professionally lowered vehicle without breaking the bank. Just remember to always prioritize safety, and if you’re unsure about any aspect of the installation process, seek assistance from a professional mechanic. Enjoy the enhanced appearance and improved handling of your lowered vehicle!
