If you own a Lincoln Town Car and are experiencing issues with your air suspension system, knowing how to properly inflate it can help you get back on the road smoothly. In this guide, we will walk you through the process step by step.
Credit: m.youtube.com
Step 1: Turn on the Ignition
Ensure that your Lincoln’s ignition is turned on before proceeding with the inflation process. This step is crucial as the suspension module needs to recognize the low trim height.
Step 2: Connect the Air Tank
Connect the air tank to the high-pressure hose that fits your Lincoln Town Car’s air suspension system. This connection will allow air to flow into the system.
Step 3: Listen for the Click
Once the air tank is properly connected, you will hear a click sound. This indicates that the suspension module has started the compressor and opened the air spring solenoids.
Credit: vigorairride.com
Step 4: Inflate the Air Suspension
With the air tank properly connected and the ignition turned on, you can now begin inflating the air suspension. Make sure to monitor the height of the suspension as you inflate it to ensure it reaches the desired level.
Step 5: Turn off the Ignition
Once the air suspension is properly inflated, you can turn off the ignition. This will prevent any further air from entering the system and help maintain the desired suspension height.
By following these steps, you can successfully inflate the air suspension on your Lincoln Town Car.
Can You Manually Inflate Air Ride Suspension?
No, you cannot manually inflate air ride suspension. Attempting to manually inflate the airbags will only result in them deflating soon after. If your air suspension is not holding air, it may be due to faulty height sensors, leaking supply lines, or failed solenoids. It is recommended to have a professional inspect and repair the system.
Common Issues with Air Suspension
When the air suspension light comes on in a Lincoln Town Car, it usually indicates a problem with the air suspension system. Some common issues include:
- Air leaks
- Faulty sensors
- Failing air compressor
Turning off the Air Suspension
If you need to turn off the air suspension on your Lincoln Town Car, you can do so by locating the air suspension shut-off switch. This switch is typically located on the left side of the trunk. By turning it off, you can temporarily disable the air suspension system.
Alternative Solutions
If you are facing recurring issues with your air suspension system or if it is beyond repair, you may consider alternative solutions such as:
- Replacing the air springs with regular coil springs
- Upgrading to a different type of suspension system
Frequently Asked Questions For How To Inflate Air Suspension On Lincoln Town Car
Can You Manually Inflate Air Ride Suspension?
Yes, you can manually inflate air ride suspension, but it may not stay inflated due to faulty sensors, leaking supply lines, or failed solenoids. It is recommended to check these components and address any issues. Manually filling the air suspension can be done by connecting an air tank to the high-pressure hose and turning on the ignition.
How Do You Manually Raise Air Suspension?
To manually raise air suspension on a Lincoln Town Car, connect an air tank to the high-pressure hose and turn on the car’s ignition. The suspension module will activate the compressor and open the air spring solenoids, causing a clicking sound.
This will inflate the air suspension.
Why Does My Lincoln Town Car Say Air Suspension?
When the air suspension light comes on in a Lincoln Town Car, it means there is a problem with the air suspension system. This could be due to air leaks, faulty sensors, or a failing air compressor. Unfortunately, you cannot manually inflate the air ride suspension as it will go back down.
You may need to inspect and repair the faulty components or consider installing regular coil springs instead.
How Do You Turn Off The Air Suspension On A Lincoln Town Car?
To turn off the air suspension on a Lincoln Town Car, locate the shut-off switch in the trunk on the left side. This will disable the air suspension system.
How Can I Manually Inflate Air Ride Suspension On My Lincoln Town Car?
To manually inflate the air ride suspension on your Lincoln Town Car, you can use a compressor and connect it to the air tank. Make sure to turn on the ignition and listen for the click of the air spring solenoids opening.
Can I Raise The Air Suspension On My Lincoln Town Car Manually?
No, you cannot manually raise the air suspension on your Lincoln Town Car. However, you can remove the air springs and replace them with regular coil springs to eliminate the air ride system.
Conclusion
Inflating the air suspension on your Lincoln Town Car is a relatively straightforward process if done correctly. However, it is important to address any underlying issues with the system to prevent further complications. If you are unsure or uncomfortable with the process, it is always best to consult a professional for assistance.
